Antriksh Technosys Private Limited

Additional Information:

• Delivery Time: 15
• Packaging Details: we will provide Charger, adapter, Antenna, Belt clip,

MPLEXor two frequency duplex operation

• EEPROM programmable with a PC computer
• Single channel and 99 channel versions available
• Full dot matrix liquid crystal display
• All FM frequency bands from 30 to 520 MHz
• Front facing speaker
• Transmit time limiter to prevent channel jamming
• TX and RX encryption
• Two channel scanning modes
• 5 tone encoder decoder plus DTMF encoder decoder
• 22, 26 or 35MHz switching bandwidth (model dependant)
• Up to 99 channels with channel labels
• Two-stage front end allows mixed simplex and duplex operation
• Channel selectable wide or narrow channel spacing
• CTCSS/DCS on a per channel basis
• 5x4 Keypad for channel change etc
• 2RU equipment cabinet
• Step-up VCO voltage for superior selectivity
• Low stand-by current is ideal for solar installations
• Watch dog timer

Dual-Purpose Repeater, Continuous-Duty and Cycle-Rated

• 16 Channels
• 10 to 50 Watts (adjustable)
• VHF: 136 – 150 MHz; 150 – 174 MHz
• UHF: 400 – 430 MHz; 450 – 480 MHz
• 8-Character ANI/ENI ID Display
• FCC Narrowbanding Compliant

The VXR-7000 helps expand communication range of two-way radio systems, and can operate as a base station. Continuous-duty and cycle-rated to enhance productivity for a maximum return on investment.

Additional Information:

• Item Code: A13670011

• Primary DC Input Connector
• Auto-Switchd Back-Up DC Input Connector
• Backup Battery Warning/Operation Tones
• Rear External Speaker Output (4 Watts Audio)
• Rear Test-Speaker-AUX Connector (15-Pin)
• Programmable AUX Input/Output Functions
• Toggle or Momentary Operation on AUX Input Ports
• Pre-Emphasis On/Off Control (at TA AUX Input)
• DSP Processed QT/DQT
• QT/DQT Squelch-Tail Elimination
• Embedded Message with Password Protection
• High Stability Oscillators (TCXO)
• Flash Memory

• Full-Duplex Operation
• Built-In 16 QT/DQT Tone/Code Pair Community
• Repeater Operation
• External Controller Interface
• Conventional or Trunking Controller Compatible
• Repeat Enable/Disable
• 8 CW Transmitter IDs
• Repeat Hold Timer (Hang Timer)
• Time Out Timer

• 16 Channel
• Simplex or Full Duplex Operation
• Antenna Switch for Simplex/SIngle Antenna Operation
• Priority Scan
• Remote Control Inputs
• 7-Segment 2-Character Channel & Scan LED
• 2 Character Alphanumeric Channel Designator
• 6 Lighted PF Keys
• Local Takeover/Remote PF Keys
• Voice Encryption Port

The CDR700 repeaters offer the increased functionality, power and range necessary to enhance the capabilities of the PRO Series mobile radios. Having clear communication over an extended range translates into superior customer service, giving you the advantage of reaching your people in more places, with more information and better solutions for your customers

• VHF : 146-174 MHz
• 5-25W Output Power
• Repeater Operation
• NXDN Digital Air Interface
• AMBE+2 VOCODER
• 6.25 12.5 kHz Channels (Digital)
• Digital Conventional mode
• Digital Trunking mode (Software Licence)
• Digital Multi Site Trunking Network mode (Software License)
• Mixed FM/Digital Operation
• FM Conventional Mode
• External LTR Controller Interface
• Ethernet Network Interface

• IP LAN/WAN Connectivity
• NXDN Digital Scrambler
• 6 Programmable Function Keys
• Meet Analogue Digital ETSI European Standard 

R TTE STANDARD:

• EN 300 086, EN 300 113, EN 300 219, EN301 489, EN 301 166 (Voice Data for 6.25 kHz Digital )

SAFETY STANDARD:

• EN 60065, EN 60950-1, EN 60215

• UHF : 440-470 MHz
• 5-25W Output Power
• Repeater Operation
• NXDN Digital Air Interface
• AMBE+2 VOCODER
• 6.25 12.5 kHz Channels (Digital)
• Digital Conventional mode
• Digital Trunking mode (Software Licence)
• Digital Multi Site Trunking Network mode (Software License)
• Mixed FM/Digital Operation
• FM Conventional Mode
• External LTR Controller Interface
• Ethernet Network Interface

• IP LAN/WAN Connectivity
• NXDN Digital Scrambler
• 6 Programmable Function Keys
• Meet Analogue Digital ETSI European Standard 

•  
  • Fully Supports NXDN Type-C Trunking 2nd Generation as well as NXDN Conventional
  • Mixed Digital FM Analog Operation
  • Built-in IP Interface for sending remote control command in both conventional and trunking modes
  • 30 Channel Scanning Base Station (Conventional Mode)
  • 0.5-5 W, 5-25 W RF/Exciter Output
  • Programmable AUX I/O's
  • LED Status Indicators
  • 6 Programmable Function Keys
  • 0.3 W Front Panel Speaker
  • 3 W External Speaker Audio
  • KXK-3 OCXO Option
  • KPG-110SM System Manager PC Software Option
  • KPG-149RM/SA Repeater Monitor PC iOS app
  • FM Analog Trunking Controller Interface (LTR/MPT1327)
  • Telephone Interconnect Adapter Option

•  
  • Supports NXDN Conventional NXDN Type-D Trunking (Option)
  • Mixed Digital FM Analog Operation
  • 30 Channel Scanning Base Station (Conventional Mode)
  • Multi-Site Conventional IP Network (via KTI-3 option)
  • Programmable AUX I/O's
  • Two-Digit LED Display
  • 6 Lighted Programmable Function Keys
  • Front Panel Speaker
  • Rear External Speaker Output (4 Watts Audio)
  • FM Analog Trunking Controller Interface (LTR/MPT1327)
  • KPG-149RM/SA Repeater Monitor PC iOS app

•  
  • Supports NXDN Conventional NXDN Type-D Trunking (Option)
  • Mixed Digital FM Analog Operation
  • 30 Channel Scanning Base Station (Conventional Mode)
  • Multi-Site Conventional IP Network (via KTI-3 option)
  • Programmable AUX I/O's
  • Two-Digit LED Display
  • 6 Lighted Programmable Function Keys
  • Front Panel Speaker
  • Rear External Speaker Output (4 Watts Audio)
  • FM Analog Trunking Controller Interface (LTR/MPT1327)
  • KPG-149RM/SA Repeater Monitor PC iOS app